Skip to main content

SonicWall Tells Gen 6 Firewall Owners to Replace Them Now, and Cyber Essentials Points the Same Way

SonicWall said on 18 November that all Gen 6 firewalls on SonicOS 6.x are out of support and will get no patches, even for critical flaws. What small firms should check, and why Cyber Essentials treats an unsupported firewall as a problem.

KBY News Desk8 min read
An IT professional operates a computer in a server room, managing network systems and connected devices.

SonicWall told customers on Wednesday 18 November that every Gen 6 and Gen 6.5 firewall running SonicOS 6.x has reached end of support, will receive no more security patches, and should be replaced now rather than left on the internet edge. The company’s product advisory was reported by Help Net Security on Thursday 19 November and The Hacker News on Friday 20 November. Neither report describes a new flaw being attacked today. This is a lifecycle warning, but a blunt one: SonicWall says any new vulnerability, “even a Critical one”, stays open permanently on these devices.

We are covering it a few days late because it matters most to the readers who are least likely to have seen it: small firms with a SonicWall box in the comms cupboard that was installed years ago, perhaps by a supplier they no longer use. For UK organisations there is a second reason to act, because the Cyber Essentials scheme treats an unsupported firewall as a problem in its own right.

#What SonicWall actually said

Help Net Security reports that SonicWall’s advisory covers all Gen 6 and Gen 6.5 appliances running SonicOS 6.x, including the Gen 6 virtual firewalls, and says there will be no firmware updates or security patches “regardless of severity”. SonicWall calls the Gen 6 fleet a high-risk exposure and, in the words quoted by The Hacker News, says: “We expect internet-facing Gen 6 firewalls to be actively targeted.” Its reasoning is that attackers use automation and AI to find unsupported edge devices, read patch notes and build working exploits faster than before. In a line quoted by Help Net Security, SonicWall puts it as “Every fix is a map”: when a flaw affects several generations, supported firewalls get a fix, Gen 6 does not, and the public advisory then tells attackers where to look.

The models The Hacker News lists as running SonicOS 6.x include the TZ300, TZ350, TZ400, TZ500 and TZ600 families, the SOHO and SOHO 250 units, the NSA 2600, 3600, 4600, 5600 and 6600, the NSa 2650 to 9650 range, the NSv virtual appliances, SuperMassive 9200 to 9800 and NSsp 12400 and 12800. SonicWall’s own advisory carries the full list and the end-of-support date for each model. We could not read that page, because SonicWall’s site refused our automated request, so we have relied on the two outlets that did. Check the model-by-model table on SonicWall’s site rather than taking our summary as complete.

#Why this is more than a vendor sales pitch

A hardware supplier telling customers to buy new hardware deserves some scepticism, and we will say plainly that SonicWall has a commercial interest here. Two of its claims, as reported, are also its own: that the median time from disclosure to exploitation has fallen sharply, and that its Gen 8 firewalls have been “hardened with frontier AI-assisted security testing”. We cannot verify the second and would treat it as marketing.

The wider point stands on independent evidence. Google’s M-Trends 2026 report says the mean time to exploit vulnerabilities has dropped to an estimated minus seven days, meaning exploitation is routinely happening before a patch is even released. It also describes attackers deliberately targeting edge and core network devices such as VPN appliances and routers, which typically lack endpoint detection telemetry. SonicWall, citing the Verizon 2025 Data Breach Investigations Report, says edge devices and VPNs were the target in 22 per cent of breaches that began with an exploited vulnerability, up from 3 per cent a year earlier. Help Net Security adds that US cyber agency CISA has flagged three vulnerabilities used to attack SonicWall firewalls over roughly the last two years.

Our reading is that an unsupported firewall is a particularly bad kind of unpatched device. It sits on the boundary, it usually has remote access such as an SSL VPN switched on, and its owner is unlikely to be watching its logs. When the next flaw that affects several SonicWall generations is disclosed, the supported ones will get a fix and the public write-up will describe the hole; that is SonicWall’s own argument, and we think it is sound.

#What Cyber Essentials says about an unsupported firewall

This is the part that matters for UK small businesses. The NCSC’s Cyber Essentials requirements for IT infrastructure, version 3.3, dated April 2026, define “software” to include “firewall and router firmware”, and apply the Security Update Management control to firewalls and routers as well as to laptops and servers. The control says all software in scope must be licensed and supported, and must be “removed from devices when it becomes unsupported, or removed from scope by using a defined sub-set that prevents all traffic to or from the internet”. It also requires updates that fix vulnerabilities the vendor rates critical or high, or that score 7 or more on the CVSS scale, to be installed within 14 days of release.

The sub-set route is the escape hatch for old equipment that cannot be replaced, such as a lab machine on a separate network. It cannot reasonably apply to the device that is the connection to the internet. So in our reading, a Gen 6 firewall at the boundary of a network in scope for Cyber Essentials no longer fits the scheme. The certification body and assessor decide, not us, and we have not seen a statement from the NCSC or the scheme’s delivery partner about Gen 6. If your certificate comes up for renewal in the next few months, ask your certification body now how they will treat an end-of-support boundary firewall, rather than finding out at the assessment. Our Cyber Essentials explainer for small businesses sets out what the five controls ask for.

#What to do this week

  • Find out whether you have one. Ask whoever installed or supports your network, and check the model label on the device. The firmware version is usually shown on the firewall’s status page in its admin interface; a version beginning “6” means SonicOS 6.x. If you use an outsourced IT provider, send them this question in writing: “Do we have any SonicWall Gen 6 or SonicOS 6 firewalls, including at branch offices, and what is the plan to replace them?”
  • Count the spares. SonicWall’s advice, as reported by Help Net Security, is to inventory every Gen 6 firewall, including spares and branch office units, then put the internet-facing ones and those providing remote access first.
  • Plan the replacement. SonicWall points customers to Gen 8 firewalls running SonicOS 8 and says supported settings migrate from SonicOS 6.5 with an in-product import or its NSM Migration App, so you do not have to rebuild the configuration from scratch. Ask an authorised partner for a quote. Nothing obliges you to stay with the same brand, so it is reasonable to get a second quote for a supported firewall from another vendor.
  • Reduce the exposure while you wait. The Hacker News lists SonicWall’s interim steps: turn off management over the WAN (HTTPS, SSH and SNMP), disable SSL VPN or restrict it to known source addresses, enforce multi-factor authentication on every remaining remote-access and admin account, reset local passwords, disable unused services and watch the logs for unusual logins and configuration changes.
  • Do not rely on being small. We think SonicWall is right that scanning for old edge devices is indiscriminate, since a scanner does not know whether it has found a dental practice or a law firm. That is our reading, not a measured figure.

#The same lesson as the Synology warning

Readers of our recent report on ransomware against Synology NAS devices will recognise the pattern: a flaw fixed long ago, and attackers going after the devices that never received the fix. Gen 6 is the same story one step earlier, because here the fix will never exist. If you are building a list of equipment to check, put perimeter firewalls, routers, NAS boxes and VPN appliances at the top, then see our firewalls reference for how the pieces fit together.

#What we expect, and what would change our view

We expect more vendors to issue warnings of this kind as AI-assisted scanning makes a long tail of old edge hardware cheaper to attack. That is a prediction, not something any of the sources says. We would be wrong if SonicWall’s guidance turned out to hide a specific, already exploited flaw that was kept quiet; that would make this an incident, and we would update this story. Equally, if the NCSC or the scheme’s delivery partner say Gen 6 firewalls can stay in scope with compensating controls, the Cyber Essentials point above would soften, though the patching problem would not.

Our advice is simple: if the box is facing the internet and is on SonicOS 6, put replacement in this quarter’s budget, not next year’s. The interim steps buy time, but they are not a substitute for a device that gets fixes.

Evidence trail

Sources and verification

Primary documentation and external technical references used in this article.

  1. 01Help Net Security: SonicWall urges customers to replace Gen 6 firewalls now (19 November 2026)helpnetsecurity.com
  2. 02The Hacker News: SonicWall Warns Gen 6 Firewalls Won't Get Security Patches, Even for Critical Flaws (20 November 2026)thehackernews.com
  3. 03NCSC: Cyber Essentials Requirements for IT Infrastructure v3.3 (April 2026)ncsc.gov.uk
  4. 04Google Cloud: M-Trends 2026cloud.google.com

About this page

Credited to

Dates

Published

Corrections

No corrections are listed for this page. Some review sweeps corrected pages without naming each one; those are in the corrections log.

Reader Interaction

Comments

Add a thoughtful note on SonicWall Tells Gen 6 Firewall Owners to Replace Them Now, and Cyber Essentials Points the Same Way. Comments are checked for spam and held for moderation before appearing.

Loading comments...

Get new fixes by email.

New runbooks, configuration traps and fixes from KBY Technologies, about twice a week.